Artificial Stone Countertop Craft

1. Cutting
According to the size of the drawing, generally small factories use small portable cutting saws, and relatively large factories use bridge cutting machines or horizontal cutting machines.
When cutting the material, pay attention not to leave the on-site seam at the corner, so as to avoid accidents such as cracking and deformation during the use of the countertop.
2. Trimming
In the opened material, the bonding surface needs to be trimmed, and the trimming is required to be smooth.
3. Bonding
Prepare the materials to be bonded after repairing the bonding surface.
Adjust the special glue, add an appropriate amount of curing agent and stir evenly.
Clamp the material with the clamp Pay attention to the force direction of the clamp.
4. Grinding
The bonded countertop is generally trimmed with an angle grinder, and then it can be polished. There are many ways to polish it.
But pay attention to a rule, polishing should be done layer by layer, the order is
180--240--320--400--600--800
After sanding, it can be polished. Wax before polishing. Polish with wool polishing cotton.